这种漆包线采用复合涂层结构，内层为聚酯亚胺，外层为具有高热稳定性的聚酰胺酰亚胺，与其他类型的漆包线相比，这种漆包线具有优越的柔韧性、耐热性、漆膜的连续性佳，漆包线的伸长率比普通漆包线提高10%左右，软化击穿温度高达300℃;经170±5℃10分钟处理后0.40mm漆包线的粘合强度不小于2N。在室温下，其击穿电压大于6500伏，当漆包线拉伸5%后，其盐水针孔为零个。这种漆包线特别适用于制造彩电偏转线圈，长期工作温度为180℃,其性能符合GB/T 6109.18-2008,IEC 60317-37:2000，IDT。

The wire has a mulriple coat structure with base coat of polyesterimide paint and outer layer of adhesive coatingwhich has a high thermal stability.Compared with othertypes of self-adhesive enamelled wires,this wire has the advantages of flexbilityN therma stability^ high cohesional strength and excellent continuity of insulation paint film. Elongation rate of this wire is improved by about 10% in comparison with common enamelled wires.The temperature of its soften breskdown point reaches 300℃ Through a temperature of 170 ± 5℃ within 10 mins.diameter 0.40mm of this type of wire can have a cohesional strength not less than 2N.At room temperature, the breakdown voltage will be above 6500 volts.After being stretched by 5% longer,there should be no pin holes.This wire is specially suitable for continuous duty is 180℃, The properties of wire are in accordance with standard GB/T 6109.18-2008,IEC 60317-37:2000，IDT